|
 |
 |
Aloe
Lightning Single Pole Electrotherapeutic Cabinet |
 |
Diathermy Machine Spark Gap |
 |
Eight-Series Fischer Kolischer Spark Gap |
 |
Kinraide Coil |
 |
Kinraide-Behary Spark Gap (Brass Disks)
This is an adjustable quenched spark gap that uses brass disks spaced
less than .015" apart.
|
 |
Kinraide-Behary Spark Gap (Graphite Plates) |
 |
Virtual
Reproduction Thompson Plaster Spark Gap |
 |
Figure 1:
Tesla Oscillator
For Experimental Use |
 |
Tesla Patent
583,593: Electric Circuit
Controller that charges the condensers
in parallel and discharges them in series |
 |
Figures 4
& 7: Misc. Tesla Oscillators
with mechanical breaks |
 |
Tesla Oscillator for Ignition Purposes:
Patent 609,250
A Tesla Coil for igniting gas engines - a "Tesla" ignition
coil. |
 |
Tesla
Oscillator with Mercury Interrupter:
Patent 609,248
This patent utilizes a liquid-to-liquid "make", with
an insulating
disk used to separate the liquids for the "break" duration. |
 |
Tesla
Oscillator with Mercury Interrupter:
Patent 609,247
This patent utilizes liquid-to-solid interruptions of a
centrifugal ribbon of mercury to make and break contact
with a fan blade. |
 |
Tesla Oscillator with Mercury Interrupter:
Patent 609,251
It's not perfect, but these still took forever to draw! |
 |
Tesla Oscillator For Producing Ozone
Here are some 3D renderings I made of a famous Tesla Coil. |
|
|
Tesla Oscillator for Ignition Purposes:
Patent 609,250
A Tesla Coil for igniting gas engines - a "Tesla" ignition
coil. |
|
|
Tesla
Oscillator with Mercury Interrupter:
Patent 609,248
This patent utilizes a liquid-to-liquid "make", with
an insulating
disk used to separate the liquids for the "break" duration. |
|
|
Tesla
Oscillator with Mercury Interrupter:
Patent 609,247
This patent utilizes liquid-to-solid interruptions of a
centrifugal ribbon of mercury to make and break contact
with a fan blade. |
|
|
Tesla Oscillator with Mercury Interrupter:
Patent 609,251
It's not perfect, but these still took forever to draw! |
|
|
Tesla Oscillator For Producing Ozone
Here are some 3D renderings I made of a famous Tesla Coil. |
 |
3D
Rendering of Kinraide Coil |
 |
Special Spark
Gap For Producing Ozone |
 |
Eight
Series Adjustable Binary Spark Gap:
From .001" - .254" in .001" increments! |
 |
The
Tesla High Frequency Coil: Its Construction And Uses (1910)
By: George F. Haller and Elmer Tilling Cunningham
Virtual 12" Feature Tesla Coil
(I
decided to do a 3D rendering of this coil until I get the chance to
actually build it...) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All images (C) Jeff Behary, 2006 |
